Scania DI13 series User Manual

OPM 250 en-GB 71
©
Scania CV AB 2016, Sweden
Technical data
Lubrication system
Injection system
Oil volume See Maintenance
Oil cleaning Centrifugal oil cleaning
Oil cooler Coolant cooled, full flow
Oil filter Paper filter, full flow
Interval between oil changes (h) 500
Oil grade
Engines run on low-sulphur fuel ACEA E5 or E7
Engines not run on low-sulphur fuel Total Base Number (TBN) >
12 (ASTM D2896)
Oil pressure (bar)
Normal with the engine at operating temperature, operating speed 3-6
Minimum permitted at idling speed 0.7
Crankcase pressure with closed crankcase ventilation (mbar) -5.4 to 2.0
Type PDE (unit injector)
Control system EMS
Fuel filter Paper filter from Scania
Fuel filter with water separator Paper filter from Scania

Scania DI13 series Specifications

General

Cooling System	Liquid-cooled
Displacement	12.7 liters
Aspiration	Turbocharged
Aftertreatment	SCR (Selective Catalytic Reduction)
Engine Type	Inline 6-cylinder
Fuel System	Common rail direct injection