EasyManuals Logo

Scania DI13 series User Manual

Scania DI13 series
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
OPM 250 en-GB 6
©
Scania CV AB 2016, Sweden
Environment and safety
Note:
Advisories preceded by Note: refer to informa-
tion important to ensure the best possible opera-
tion and functionality. Example:
Note:
Leave the engine off for at least 1 minute before
you check the oil level.
Environment
This Operator’s Manual contains specially high-
lighted text with instructions to help protect the
environment during maintenance. Example:
Environment
Use a suitable container. Used fuel must be dis-
posed of as specified in national and internation-
al laws and regulations.
Warnings and advisories
Smoking
WARNING!
Smoking is prohibited
in the vicinity of flammable or explosive ma-
terial, e.g. fuel, oils, batteries, chemicals
when refuelling and in the vicinity of the fill-
ing station
when working on the fuel system
Safety precautions for running the
engine
Daily maintenance
Always carry out a visual inspection of the en-
gine and engine compartment before starting the
engine or when the engine has been switched off
after operation.
This inspection should be done to detect fuel, oil
or coolant leaks, or anything else that may re-
quire corrective action.
Fuel
WARNING!
The wrong fuel grade can cause breakdowns or
stoppages by causing the injection system to
malfunction. This can cause damage to the en-
gine and, possibly, personal injury.
IMPORTANT!
The operator is responsible for using the correct
type of fuel to ensure that local laws and regula-
tions are complied with.
For further information on fuel, see the section
Composition of the fuel
.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Scania DI13 series and is the answer not in the manual?

Scania DI13 series Specifications

General IconGeneral
Cooling SystemLiquid-cooled
Displacement12.7 liters
AspirationTurbocharged
AftertreatmentSCR (Selective Catalytic Reduction)
Engine TypeInline 6-cylinder
Fuel SystemCommon rail direct injection

Related product manuals