Scania DI13 series User Manual

DI13
Marine engine
en-GB 2 453 210
Issue 4.0
Operator's manual
PDE
Important information
Serious risk of injury
When working on the engine, for example when adjusting drive belts and the clutch, or when changing the
oil, it is important not to start the engine. The engine could be damaged, but more importantly there is a
serious risk of injury.
For this reason, always secure the starting device or disconnect a battery cable before working on the engine.
This is especially important if the engine has a remote starter or automatic starting.
WARNING!
This warning symbol and text can be found next to those maintenance items where it is particularly impor-
tant to bear in mind the risk of injury.
Start-up Report – Warranty
The warranty starts when the start-up report has been filled in and sent to Scania. The normal warranty pe-
riod is 1 year, but other conditions can apply.
Fill in the particulars from the start-up report below as well. This can make things easier if you need to con-
tact a workshop, for example.
Engine type and variant are indicated on the engine data plate.
Engine serial number
Date of entry into service
User's name and address
Signature
Engine type
Variant

Scania DI13 series Specifications

General

Cooling System	Liquid-cooled
Displacement	12.7 liters
Aspiration	Turbocharged
Aftertreatment	SCR (Selective Catalytic Reduction)
Engine Type	Inline 6-cylinder
Fuel System	Common rail direct injection

Summary

Important Information

Serious Risk of Injury

Warns about serious injury risks when working on the engine.

Environment and Safety

General Safety Precautions

Summarizes key safety measures for operating and maintaining Scania engines.

Warnings and Advisories Explained

Explains different types of advisory messages and their significance.

Operational Safety Guidelines

Maintenance Safety Guidelines

Details safety measures for maintenance, including engine shutdown and hot surface handling.

Starting and Running the Engine

Pre-Start and Running Checks

Outlines essential checks before first start and before each run.

Engine Starting Procedure

Provides detailed steps for safely starting the engine, including warnings.

Engine Condition Monitoring

Lubrication System Maintenance

Oil Grade and Analysis Recommendations

Specifies correct oil grades, quality requirements, and oil analysis benefits.

Checking and Changing Engine Oil

Cooling System Maintenance

Coolant Properties and Management

Antifreeze Concentration Guide

Air Cleaner Service

Air Cleaner Maintenance Procedures

Fuel System Maintenance

Fuel System Care and Checks

Fuel Filter Replacement and Bleeding

Miscellaneous Engine Checks

Valve and Injector Adjustment

Detailed procedures for adjusting valve clearances and unit injectors.

Diesel Fuel Specifications

Fuel Properties, Standards, and Usage

Engine Storage Procedures

Preparation and Battery Handling

Comprehensive steps for engine storage preparation and battery handling.

Scania Assistance and Support

Support Contact Information