OPM 250 en-GB 73
©
Scania CV AB 2016, Sweden
Technical data
Material content
The values indicate an approximate percentage for the different materials that make up the engine.
Recycling
Material % by weight
Steel 40
Cast iron (30% recycled) 46
Aluminium 8
Copper, bronze, brass, zinc 1.5
Lead < 0.1
Plastic < 1
Rubber < 1
Glass 0
Paints < 1
Oils and greases 3
Type of material Recommended recycling method
Metal Recycling.
Plastic Recycling, incineration.
Chemicals and oils Re-use if possible; otherwise hand in to an authorised waste disposal contrac-
tor.
Fuel filter and oil filter Hand in to an authorised waste disposal contractor.
Paint No known recycling methods.
Electronics Hand in to an authorised waste disposal contractor.
To Next Page
Loading...
