Schaeffler SMART Series - Explanation of System Settings - Screen 1; Explanation of System Settings - Screen 2

Schaeer Technologies
19
6.3 Explanation of system
settings – screen 2
Default Temperature hold:
Default temperature hold on or o
6.2 Explanation of system
settings – screen 1
Default mode:
Heating mode to which the heater is set and in which it starts
for the first time, or to which it returns if “Default” is pressed.
Default temp:
Setpoint temperature at which the heater starts, or to which it
returns if “Default” is pressed.
Default time:
Setpoint time with which the heater starts, or to which it
returns if “Default” is pressed.
Default max. speed:
Maximum setpoint, maximum heating speed in the
temp&speed modes. This does not mean that the heater will
always reach this speed. This depends, among other things,
on the geometry of the workpiece, the ledge used, etc.