Schaeffler SMART Series - Page 3

Schaeer Technologies
3
The induction heating devices HEATER50-SMART, HEATER100-
SMART, HEATER150-SMART, HEATER200-SMART, HEATER400-
SMART, HEATER600-SMART, HEATER800-SMART and
HEATER1600-SMART give rapid, clean operation. Their high
eciency level allows energy-ecient heating and shorter
mounting times. This reduces the operating costs. The uniform,
controlled heating allows consistently good quality of mounting.
Operation is simple and user-friendly, the touch-sensitive
screen is oil-resistant, dustproof and waterproof.
When heating by induction is used, there is no need at
all to use oil – this gives particularly good environmental
compatibility. The scope of application is very extensive.
It is possible to heat the loose inner rings of cylindrical or
needle roller bearings as well as sealed and greased bearings.
Compared with previous models, further improvements have
been made in performance capacity and safety and the part to
be heated need no longer be of a minimum mass.
In order to ensure durability in demanding industrial
operation, the devices are extremely robust and reliable.
Foreword