Schaller RH2 - Device information; EC declaration of conformity; Technical data; Notes

60 pages

Save Page as PDF

To Next Page

To Previous Page

humimeter RH2 Operating Manual

Page 12

14� Device information �� 51

14.1 EC declaration of conformity .................................................................51

14.2 Technical data ....................................................................................... 55

15� Notes �� 57

Main Page

Your Humimeter RH2 at a Glance2
The Main Unit2
Rear of the Main Unit3
Overview External Sensors4
The Display6
The Display Symbols7
The Menus7
Table of Contents9
Introduction13
Information about this Operating Manual13
Limitation of Liability13
Symbols Used in this Manual14
Customer Service14
For Your Safety15
Proper Use15
Improper Use15
User Qualifications15
General Safety Information16
Warranty16
On Receipt of Your Device17
Taking the Device out of Its Packaging17
Making Sure that All of the Components Have Been Included17
Scope of Supply17
Inserting Batteries18
Using the Device - Basics18
Switching on the Device18
Selecting the Product Type19
Exchanging the Sensor19
Taking a Measurement19
Switching the Device off19
The Measuring Process20
Preparing a Measurement20
Taking a Measurement20
Measurement with Plug-In Sensor20
Measurement with Humidity and Temperature Sensor21
Measurement with the Water Activity Measuring Chamber21
Measurement with the IR Temperature Sensor21
Measurement with the CO Sensor22
Adjustment Behaviour of the Sensor23
Saving Your Readings24
Hold Function - Freezing the Displayed Values24
Activating the Hold Function in the Options Menu24
Using the Hold Function24
Saving Your Readings Manually25
Saving Individual Readings25
Saving Several Readings (a Measurement Series) at the same Time27
Auto Save Function (Time-Based)28
Activating the Auto Save Function in the Options Menu28
Auto Save Function: Saving Measured Values28
Viewing Individual Readings29
Viewing Individual Readings from a Series of Measurements30
Deleting All Measured Values (Data Log)30
Deleting Individual Measurement Series31
Deleting Individual Values from a Single Series of Measurements32
Product Types33
Definition of Product Types33
Application Range35
Using the Logmemorizer Program36
Installing/Opening the Program36
Exporting Measured Values to a Computer36
Checking the Device's Status39
Configuring the Device40
Turning on Bluetooth40
Adjusting the Date/Time40
Setting the Emission Ratio41
Selecting a Language41
Activating Options42
Deactivating Options42
Selecting °C/°F43
Reducing the Device's Power Consumption43
Configuring the Display Illumination Time43
Configuring Automatic Switch-Off44
Calibrating the Device44
Configuring the Material Calibration Function44
Online Send44
Changing the Password45
Resetting the Device to Its Factory Settings46
Cleaning and Maintenance47
Changing the Batteries47
Care Instructions47
Cleaning the Device48
Faults49
Storage and Disposal50
Storing the Device50
Disposing of the Device50
Device Information51
EC Declaration of Conformity51
Technical Data55
Notes57

Other manuals for Schaller RH2

User Manual60 pages

Related product manuals

Schaller GrandTune

2 pages

Schaller RH2 - Device information; EC declaration of conformity; Technical data; Notes

Table of Contents

Other manuals for Schaller RH2

Related product manuals