humimeter RH2 Operating Manual
Page 22
5.2.5 Measurement with the CO
2
sensor
To do so: Let the device adjust to the surrounding temperature for at least 30 minutes.
• After an adequate adjustment time period, take
the CO
2
value shown on the display of the device.
» The CO
2
value is a decisive factor for the air quality.
» Examples for the correlation of the measured value
and the personal well being are listed at "7.1 Defi-
nition of product types".
» Once the reading has been taken, it can be saved
on the device (see "6.2 Saving your readings manually" or "6.3 Auto save func-
tion (time-based)").
CAUTION
Risk of injury
Risk of injury due to the measuring head
► Keep the measuring head away from your body throughout all activities.
► Keep the measuring head away from other people throughout all activities.
i Information - Measuring accuracy
This rapid and non-destructive measuring procedure allows you to take mois-
ture readings at a number of different points. When saving the individual rea-
dings, the device will automatically calculate the readings’ average (see "6.2.2
Saving several readings (a measurement series) at the same time").
i Information - Incorrect readings
Always make sure to select the correct product type for the material you are
measuring. This prevents taking incorrect readings (see "12. Faults").
13
To Next Page
Loading...
