Schaller RH2 - Resetting the Device to Its Factory Settings

humimeter RH2 Operating Manual
Page 46
10.13 Resetting the device to its factory settings
To do so: All of the options must be activated (see "10.5 Activating options").
1. Press
twice or hold for 2 seconds.
2. Select Options. To do so, press
or and confirm by pressing .
3. Select Reset. To do so, press
or and confirm by pressing .
» The display will then show the message Reset? (figure 61).
4. Confirm by pressing
.
» The device will now be reset to its factory settings.
All of your personal settings will be lost.
» The display will show the status indicator humi-
meter (figure 62).
» Resetting the device will not affect the saved
measuring values.
61
62