Schaller RH2 - On receipt of your device; Taking the device out of its packaging; Making sure that all of the components have been included

Page 17
3. On receipt of your device
3.1 Taking the device out of its packaging
• Take the device out of its packaging.
• Next, make sure that it is not damaged and that no parts are missing.
3.2 Making sure that all of the components have been included
Make sure that all of the components have been included by checking the package
contents against the following list:
3.2.1 Scope of supply
• humimeter RH2
• 4 pieces of AA Alkaline batteries
• Rubber protection cover
• Operating manual
Required accessories:
• External sensor (see "Overview external sensors" page 4).)
Optional accessories:
• Calibration equipment and calibration ampoules - for checking the calibration of
the humimeter RHx series
• humimeter USB data interface module - USB flash drive with software and USB
cable
• Battery operated portable thermal printer (only possible together with humimeter
USB data interface module) - Described in a separate operating manual
• Bluetooth module - Described in a separate operating manual
• Wall holder, mounted on humimeter RH2
• Plastic case