Schaller RH2 - Page 26

humimeter RH2 Operating Manual
Page 26
» The setting has been saved.
5. Press
to leave the Options menu.
6. Press
to leave the main menu.
Using the manual save function
To do so: The device has to be in the Data Log menu
(see "Data Log menu" page 8).
1. Press
.
» The display will now appear as shown in figure 18
and the measured value will be preceded by the
digit one.
2. Press
to enter a name for the saved reading
and to finish the measuring process.
» The display will now appear as shown in figure 19.
3. The data you have inputted can be overwritten at
any time.
4. Inputting letters:
Press and hold
to quickly scroll to the
required letter and either press it for 3 seconds or
press
to confirm the selected letter (figure 20).
5. Inputting numbers:
Press and hold
to quickly scroll to the
required number and either press it for 3 seconds
or press
to confirm the selected number.
6. Moving forward/back:
Press
to switch to another input level. Press or to move forward or
back.
7. Confirm your entry by pressing
.
» The data you entered has been saved.
18
19
20