Operating, Mounting and Maintenance Instructions
enSTD--Ge
2/
2
Information on How to Order Spare Parts 347/98 1099241
Preliminary Remark
These operating, maintenance and mounting in-
structions are meant to offer information and help to
operate SCHOTTEL installations and perform main-
tenance works. Therefore it is required that these
documents are read, understood and observed.
It has to be ensured that these instructions are made
available to anyone involved in operation and main-
tenance.
We cannot be liable for damage and breakdowns re-
sulting from disregard of these instructions.
It is a prerequisite that users are familiar with the
installations and have been instructed with respect to
possible dangers.
Information referring to numbers in illustrations and
diagrams are indicated in the text in brackets.
Important information r eferring to technical and op-
erational safety is identified by the following symbols:
ATTENTION
!
This symbol refers to operating processes and meth-
ods to avoid damage to or destruction of the material.
NOTE
This symbol indicates particularities in the process
requiring attention.
! CAUTION
This symbol is used for operating processes and
methods requiring strict adherence to prevent the
staff from being exposed to hazards.
The ”Safety and Environmental Protection Regula-
tion SV1” as well as all relevant laws being in force
in situ shall be applicable to all works on SCHOTTEL
installations.
We reserve the right of technical alterations due to
the continued development SCHOTTEL installations
are subjected to.
To Next Page
Loading...
