Assembly
26
02.00 | GWB | Assembly and Operating Manual | en | 389122
4.3 Mounting the sensor
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
• For the exact type designations of suitable sensors, please see
catalog datasheet and Overview of sensors [
}
26].
• For technical data for the suitable sensors, see assembly and
operating manual and catalog datasheet.
– The assembly and operating manual and catalog datasheet
are included in the scope of delivery for the sensors and are
available at schunk.com.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
4.3.1 Overview of sensors
Designation GWB
34 44 54 64 80 100
Inductive proximity
switch IN 40
X X X X X -
Inductive proximity
switch IN 80
X X X X X X
To Next Page
Loading...
Need help?
General
