Table of Contents
4
14.00 | JGP | Assembly and Operating Manual | en | 389157
5.2.2 Pneumatic connection............................................................................25
5.3 Mounting the sensor .......................................................................................... 26
5.3.1 Overview of sensors ...............................................................................26
5.3.2 Setting dimensions for magnetic switches .............................................27
5.3.3 Switch-off hysteresis for magnetic switches ..........................................28
5.3.4 Turn control cam ....................................................................................28
5.3.5 Mounting magnetic switch MMS 22.......................................................29
5.3.6 Mounting programmable magnetic switch MMS 22-PI1........................30
5.3.7 Mounting programmable magnetic switch MMS 22-PI2 .......................31
5.3.8 Mounting programmable magnetic switch MMS-P 22 ..........................32
5.3.9 Mounting inductive proximity switch IN 80 ...........................................33
5.3.10 Mounting reed switch RMS 80 ...............................................................35
5.3.11 Mounting flexible position sensor FPS ...................................................37
5.3.12 Mounting analog position sensor APS-M1 .............................................38
5.3.13 Mounting analog position sensor APS-Z80.............................................39
5.3.14 Mounting optical distance sensor OAS...................................................41
5.3.15 Mounting the radio system RSS-R1/T2...................................................42
5.3.16 Mounting force-measuring jaw FMS ......................................................42
6 Troubleshooting .....................................................................................................43
6.1 Product does not move ...................................................................................... 43
6.2 Product is not executing the complete stroke ................................................... 43
6.3 Product is opening or closing abruptly ............................................................... 43
6.4 Gripping force is dropping.................................................................................. 44
6.5 Product does not achieve the opening and closing times..................................44
7 Maintenance ..........................................................................................................45
7.1 Notes .................................................................................................................. 45
7.2 Maintenance intervals........................................................................................ 45
7.3 Lubricants/Lubrication points............................................................................. 46
7.4 Disassembly and assembly ................................................................................. 46
7.4.1 Disassemble the product ........................................................................46
7.4.2 Assembling the product..........................................................................49
7.5 Assembly drawing............................................................................................... 54
8 Translation of original declaration of incorporation ................................................56
9 Annex to Declaration of Incorporation....................................................................57
To Next Page
Loading...
Need help?
General
