SCHUNK KSP3 - Maintenance Work; Lubricate

Maintenance and care
02.00 | KSP3, KSP3-LH, KSP3-F | Assembly and Operating Manual | en |
1463318
29
7.4 Maintenance work
7.4.1 Lubricate
CAUTION
Allergic reactions or irritation due to skin or eye contact with
lubricants on the product.
• In case of foreseeable contact with lubricants on the product
(e.g. when lubricating or cleaning), wear protective equipment
(protective gloves, protective goggles)
To maintain reliable function and high quality of the product, it has
to be regularly lubricated. This can be done with a hand lever press
for greases or by means of central lubrication.
Manual lubrication
• Press grease either into the grease nipples at
the side or front of the respective supply line
(6/7).
• Only lubricate in the open position.
• After greasing, run through the complete
stroke several times.
•
Grease to be used and lubrication
intervals. } 7.3 [ / 29]
Size
Grease quantity (strokes per grease nipple)
64
1
100
2
140
2
160
2
250
3