SCHUNK KSP3 - Sizes; Warranty; Scope of Delivery

6
02.00 | KSP3, KSP3-LH, KSP3-F | Assembly and Operating Manual | en |
1463318
General
1.1.3 Sizes
This operating manual applies to the following sizes:
• KSP3 64, 100, 140, 160, 250
• KSP3-LH plus 64, 100, 140, 160, 250
• KSP3-F plus 64, 100, 140, 160, 250
1.2 Warranty
The warranty period is 24 months after delivery date from factory
or 500 000 cycles*, if it is used as intended, under the following
conditions:
• Observe the applicable documents, } 1.1.2 [/ 5]
• Observe the ambient conditions and operating
conditions, } 2.6 [/ 8]
• Observance of the specified care and maintenance
instructions } 7 [/ 28]
Parts touching the workpiece and wear parts are not included in
the warranty.
* A cycle consists of a complete clamping process ("Open" and
"Close").
1.3 Scope of Delivery
Clamping force block
KSP3 or KSP3-LH plus or KSP3-F plus
(without top jaws)
ACCESSORY KIT:
(for contents, see sealing kit list and parts list) } 8.1 [/ 37]