SCHUNK SWS 005 - Change Sensors; Change Integrated Piston Stroke Control

Maintenance
12.00 | SWS | Assembly and Operating Manual | en | 389456
103
7.8 Change sensors
7.8.1 Change integrated piston stroke control
CAUTION
Risk of injury from objects flying out!
Do not apply compressed air to the compressed air connections
during assembly of the piston stroke control, as parts may come
loose or the adapter plate or the O-ring may be damaged.
• Only apply compressed air to the pneumatic connection when
the SWK is mounted on the robot.
NOTE
The integrated piston stroke control can be retrofitted if required.
The installation for retrofitting is carried out in the same way as
for replacement. Contact SCHUNK for ordering retrofit parts.