SCHUNK SWS 005 - Sws 011 Hm

Design and description
26
12.00 | SWS | Assembly and Operating Manual | en | 389456
4.2.5 SWS 011HM
SWK
SWK robot side SWK locking interface
Design SWK 011HM
1 Locking mechanism
2 Pneumatic feed-through with rubber bushing
3 Alignment pin bushing
4 Locking ball
5 Air supply lock and unlock
6 Integrated piston stroke control
SWA
Design SWA 011
1 Alignment pin
2 Bearing race
3 Pneumatic feed-through
4 Port for pneumatic feed-through