SCHUNK SWS 005 User Manual

Assembly
12.00 | SWS | Assembly and Operating Manual | en | 389456
71
5.4.2 Check integrated piston stroke control
CAUTION
Risk of injury from objects flying out!
Do not apply compressed air to the compressed air connections
during assembly of the piston stroke control, as parts may come
loose or the adapter plate or the O-ring may be damaged.
• Only apply compressed air to the pneumatic connection when
the SWK is mounted on the robot.
CAUTION
The sensor adjustment can be lost!
Do not move or remove sensors from the sensor assembly. The
sensors are preset at the factory.
NOTE
The sizes SWS007, SWS011HM, SWS020HM, SWS021HM,
SWS040Q, SWS046, SWS076, SWS110 and SWS160 can be
equipped with an integrated piston stroke control.
If the integrated piston stroke control is required later for these
sizes, the piston stroke control can be retrofitted. For more
information, please contact SCHUNK.

SCHUNK SWS 005 Specifications

General

Brand	SCHUNK
Model	SWS 005
Category	Industrial Equipment
Language	English