Maintenance
12.00 | SWS | Assembly and Operating Manual | en | 389456
95
SWA 020, 021, 040Q, 041, 060, 071 SWA 046, 076, 110, 160
Clean the locking mechanism on the SWA
Ø Clean the alignment pin bushing(1) and bearing race(2) and
remove lubricant residues and dirt.
Lubricate locking mechanism and alignment pin on SWK
Ø Generously lubricate the locking mechanism(1) and alignment
pin(2), Lubricants/greasing areas [
}
89].
NOTE
The alignment pin bushings and the bearing race are sufficiently
lubricated at the factory and do not need to be relubricated.
To Next Page
Loading...
Need help?
General
