What to do if the screen is not responsive on SciQuip Laboratory Equipment?
If the screen of your SciQuip Laboratory Equipment is not responsive, it may be due to high-frequency interference. Try restarting the equipment. If that doesn't work, notify the distributor.
General| Temperature Range | Ambient +5°C to 60°C |
|---|---|
| Shaking Speed | 30 to 300 rpm |
| Orbit | 19 mm |
| Type | Incubator Shaker |
| Platform Size | 300 x 300 mm |
| Timer | 1 min to 99 hours or continuous |
| Power Requirements | 230V, 50/60Hz |
Details the physical size, layout, and stacked configurations of the incubator unit.
Lists and describes the main unit, door, and inner chamber components.
Explains shaking control, temperature control, electronics, and tray operation.
Lists technical parameters including dimensions, performance, and power.
Covers safe unpacking, lifting, and precise leveling procedures for the unit.
Details preliminary cleaning and electrical connection requirements.
Instructions for installing flask clamps and sticky mats on shaking trays.
Procedure for adjusting the shaking orbit diameter from 1-50mm.
Information on refrigerated units and Modbus TCP/IP communication.
Explains the main display, buttons, and status indicators on the home page.
Guides users on accessing the settings menu via password.
Describes how to select control modes and functions via the FUNC page.
Explains switching between fixed and programmable control for temp and speed.
Covers temperature holding settings and automatic defrost cycle configuration.
Details setting up multi-segment programs for experiments.
Explains operation of LED lighting, including fixed and programmable modes.
Instructions for setting the real clock time and other system parameters.
Details operator/admin password management and communication address setup.
Covers using the USB data logging system and controlling illumination lights.
Provides guidance on using, loading, unloading, and maintaining sticky mats.
Defines how to set temperature and speed deviation thresholds for alarms.
Outlines daily, annual, and as-required maintenance checks.
Instructions for replacing the fuse and cleaning cooling condensers.
Details on cleaning and replacing the sticky mat for optimal performance.
To Next Page