MAN.270.EN--05--SDT270-user-manual-Eng.docx
When the upgrade or update process are completed, disconnect your SDT270 from your
computer and then restart it.
18.2 Updating & upgrading your SDT270 using DataDump
software (for SDT270 SD and DD device versions)
You need first to install first the SDT270 driver, to install DataDump software, and
to activate it, before performing an update or an upgrade.
You need an Internet connection to complete an update or an upgrade.
After the warranty period, this functionality is reserved to our customers who have
a valid SoundCare Support Program.
18.2.1 Updating
To get the latest version of your SDT270 Firmware, Turn on your SDT270 and when the measurement screen is loaded,
connect it to your computer using the USB/Mini USB cable.
Run DataDump, tick the radio button ''USB'', develop the menu Device and select Update Firmware'.
To Next Page
Loading...