Need help?Do you have a question about the Seaory S21 and is the answer not in the manual?
Details the primary operational capabilities of the card printer.
Highlights the advanced characteristics and benefits of the card printer.
Lists technical specifications like print method, power, resolution, and card material.
Details the physical dimensions and net weight of the Seaory S21 card printer.
Identifies and describes the main components located on the top of the printer.
Explains the front-facing ports, power switch, and defective card slot.
Describes the card exit mouth, output hopper, and bottom components.
Details the key internal parts like the air fan, print head, and ribbon mechanisms.
Guides on checking the printer and accessories upon unpacking and lists all included items.
Explains the function of each accessory provided with the printer.
Step-by-step guide for installing the cleaning roller into the printer.
Instructions for correctly installing the YMCKO or monochrome ribbon cartridge.
How to adjust the card thickness regulator for different card types.
Guidance on correctly placing cards and adding the weight module.
Attaching the output hopper and connecting power and communication cables.
Lists supported OS and provides essential pre-installation guidelines.
Detailed steps for installing the printer driver via USB connection.
Steps for configuring network settings and integrating the driver for Ethernet communication.
Accessing and modifying print settings like orientation, resolution, and paper size.
Settings for automatically detecting or manually selecting the ribbon type.
Setting print orientation to portrait/landscape and rotating the print page.
Configuring card feeding modes and print ejection options.
Managing rejected cards and advanced card input/output configurations.
Adjusting image color settings and defining the printable area on the card.
Setting up magnetic stripe encoding and adjusting heating energy for print quality.
Accessing printer information, tools, and performing position calibration.
Using the cleaning tool and magnetic stripe tool for maintenance and reading/writing.
Adjusting ribbon tension and accessing other utility tools.
Printing a test chart to verify driver functionality and calibrate position.
Using the Seaory iCARDE software for card design and testing.
Procedure for replacing the cleaning roller after a set period of use.
Instructions for cleaning the internal card path and using the LCM for cleaning cycles.
How to clean the print head using a cleaning stick to maintain print quality.
Detailed steps for removing and installing a new print head.
A table listing common error codes, their reasons, and recommended solutions.
Solutions for when the printer is unresponsive or outputs blank cards.
Addressing incomplete prints, defects, or lines on printed cards.
Solutions for vertical/color lines and blurry images on printed cards.
General| Print Speed | Color (YMCK): Up to 180 cards per hour; Monochrome: Up to 1400 cards per hour |
|---|---|
| Print Resolution | 600 DPI |
| Card Capacity | 100 cards |
| Card Size | CR80 (85.6mm x 54mm) |
| Connectivity | USB |
| Printer Type | Card Printer |
| Interface | USB 2.0 |
| Power Supply | AC 100-240V, 50/60Hz |
To Next Page
