Retrofitting seca 703 column scale • 91
17-10-01-266-002a/07-2018B
NOTICE!
Damage to device due to incorrect power supply unit
The power supply unit of the scale is not suitable for operation with
the
seca 452 interface module.
► Only use the power supply unit included in set 4520050009.
6. Connect the power supply unit to the seca 452 interface module:
a) Connect the power cable to the power supply connection of the
seca 452 interface module
b) Insert the power supply unit into a power supply socket
7. Perform the necessary final work ➔ Performing final work.
To Next Page
Loading...
