Seculink 1004Z - General, Encode, and Network Setup

第 29 页
Intelligent
analysis
Set algorithm rule: trajectory display、sensitivity、minimum pixel、alert
mode，and setting linkage parameters:period、alarm output、the screen
prompt、record、PTZ、tour、buzzer、EMAIL、FTP upload.
Note: 6000 series support this function
System
configuration
General
configuration
Set system time, data format, language, hard disk full time operation,
machine number, video format, output mode, summertime, stay time
Encode
configuration
Set main (extra) coding parameter: code mode, resolving ability, frame
rate, code stream control, image quality type, code stream value, frame
between value, video/audio enable,
Note： only Hybrid mode and full analog mode have encode
configuration.
Network
configuration
Set basic network parameters, DHCP and DNS parameters, network
high speed download
NetService
PPPOE、NTP、Email、IP purview、DDNS parameter
GUI display
Set channel title, preview hint icon state, transparency, cover area,
time title, channel title fold.
Note ： only analog channel can set channel name,region
cover ,time title,channel title fold.
PTZ
configuration
Set channel, PTZ protocol, address, baud rate, date bit, stop bit, check
Note：Hybrid mode shows PTZ configuration,T series have no this
function.
RS485
Device
Set serial port function, baud rate, date bit, stop bit, check
Note：Full digital mode shows : RS485 Device
Serial port
Configuration
(RS232)
Set serial port function, baud rate, date bit, stop bit, check
Note：T series have no this function
Tour
Set patrol mode and interval time
Spot
Set Spot tour mode and time interval
Note：only partial products of 6000 series support.