Seculink 1004Z - 4 Main Menu; Main Menu Navigation

第 28 页
4 Main menu
4.1 Main menu navigation
Main menu
Sub menu
Function
Record
Config
Set the recording configuration, recording type, recording time section
playback
Set recording search, recording play, video file storage
Storage
Set screen capture period, type ,etc.
Note：T series and 6000 series have no this function
backup
Detect backup device, format device, back the selective files
Alarm
Motion
detection
Set motion detect alarm channel, sensitivity, area, linkage parameters:
defending time section, alarm output, screen hint, recording, screen
shot, PTZ, patrol, buzz, email and FTP upload
Video
blind
Set camera mask alarm channel, sensitivity, linkage parameters:
defending time section, alarm output, screen hint, recording, screen
shot , PTZ, patrol, buzz, email and FTP upload
Video
loss
Set video loss alarm channel, linkage parameters: defending time
section, alarm output, screen hint, recording, screen shot , PTZ, patrol,
buzz, email and FTP upload
Alarm
input
Set alarm input channel, equipment type, linkage parameters:
defending time section, alarm output, screen hint, recording, screen
shot , PTZ, patrol, buzz, email and FTP upload
Note：T series have no this function
Alarm output
Set alarm mode: configuration, manual, shut down
Note：T series have no this function
Exception
handling
No HDD, HDD error, HDD capacity not enough, network cut, IP
Conflict, linkage parameters, screen hint or buzz.