第 43 页
Set method: refer to chapter 4.3.1. Motion detect
4.3.5 Alarm output
Refer to chapter 3.5.4.
4.3.6 Abnormal
Analysing and inspecting current software and hardware of the device: When some abnormal events
happen,the device will make a relative answer such as show message and buzzer.
Picture 4.11 Abnormal
【Event Type】 selecting abnormity you want to inspect
【Enable】 Select it to make sure abnormal function workable
【Show message】 Automatically alarm cue dialog box come out of the main screen
【Buzzer】 Device will have one long nosie “di” while alarm is happening
4.3.7 Intelligent analysis
*Note: only part of product support this function at present。
To analyze the video image, when system detect object that meet pre-set algorithm rules and fit set
flexibility and minimum image distance, will trigger video analysis alarm, and enable the linkage
function.
*only the 1
st
channel of full analog mode and hybrid mode can support this function, and if
To Next Page
Loading...
