第 35 页
Schedule：Realise snapshot according to record type(regular,detect and alarm)and period
Manual：No matter what the present channel is in a state,once choose"manual"button,it will
have snapshot at related channels.
Stop：No matter what the present channel is in a state,once choose "stop"button,it will stop
snapshot at related channels.
【Period】Set normal record period,it only startup Snapshot Storage at set period.
【Type】Three types:regular,detect and alarm.
Regular：snapshot at set period.
Detect：snapshot at set period when motion detect,video blind and video loss which are
preset for snapshot enable.
Alarm：snapshot at set period when alarm in which is preset for snapshot enable.
Note:for related alarm function,please refer to chapter 4.3.
4.3 Alarm Function
Alarm functions include: motion detect,video blind, video loss, alarm input and alarm output,
abnormality、intelligent analysis.
4.3.1 Motion Detect
When system detects the motion signal that reaches the set sensitivity, the motion detect alarm is on
and the linkage function is turned on.
Note: "Advanced" button is the same as right click.
*Motion detect function is different between Hybrid mode & Full digital mode:
Digital channel: not only to enable motion detect function at local side, but also to enable the
remote device that was connected. when remote device detect motion movement, local side will
start alarm recording, otherwise this function is not enable.
Hybrid mode: only need to enable motion detect function at local side.
To Next Page
Loading...
