EasyManua.ls Logo

Sega MIB - Entrance Size Requirements

Sega MIB
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRECAUTIONS REGARDING INSTALLATION LOCATION
7
22
To install this product, the entrance must be at least 0.89m (35 in) in width and
2.08m (81.8 in) in height (without Assy Billboard) and 2.53m (99.6 in) (with Assy
Billboard). If the entrance is too narrow, do not tilt the product carelessly. If
all the product weight is put on the casters at one side only, there could be
damage or deformation, causing serious accidents such as workers getting
caught underneath
2.58m(101.5in)
0.61m(24in) 0.61m(24in)
2.3m(90.5in)
Wall
0.15m

Related product manuals