Sekonic LITEMASTER PRO L-478 Series - 2-3. Power ON;OFF

10
2-3. Power ON/OFF
Power ON: PressthePowerbutton
10
for one
second.
 Themeterwillturnon,andafter
thetitlescreenisdisplayed,the
Measuring screen appears.
Power OFF:PressandholdthePowerbutton
10
for one second or longer. The
meterwillturnoffandthedisplay
disappears.
Title Screens
L-478D
•
Please wait 3 seconds between repeated power on and power off sessions.
•
Directly after replacing the batteries, a white screen with the SEKONIC logo in blue will be displayed, followed by the
appropriate title screen above.
•
An L-478 Series memory check is being executed while the blue bar graph is moving when the Logo screen is
displayed, so please do not turn OFF the power, as doing so may cause damage.
Logo Screen
•
If the LCD screen shows no display, check the battery capacity indicator. Also check for proper battery insertion (Pos/
Neg positioning).
•
All settings and measurements made during use are saved in memory even after the meter is powered off.
Powerbutton
10