Sekonic LITEMASTER PRO L-478 Series - Selecting Filter Factor Number; Deselecting Filter

48
6-5-2. Selecting Filter Factor Number
Uptofourlterscanbeusedasapackwiththe
exposuredisplaycompensatedforall.
Selectthenecessarylternameonlywhichwillbe
usedinthemeasurement.
1) SettingAmountofFilterCompensation
1. TouchtheToolBoxicon atthebottomofthe
MeasuringscreentoopentheToolBoxscreen.
2. Touch the [Filter Compensation]todisplaythe
FilterCompensationSettingscreen.
3. Touchtheradiobuttonof[Filter pack in use]
todisplaytheSelect(FilterPackinUse)screen.
IfnoltersNamesarepresent,touchoneof
thebuttonsmarked1,2,3,4toviewalistof
industrystandardlternames.
4. TouchaFilterNametoenteritandreturntothe
(FilterPackinUse)screen.
5. Ifthelteryouwantisnotimmediatelyvisible,
moveyourngerovertheSlideortouchthe
UP/DOWNarrows▲/▼toviewadditionallter
names.TouchaFilterNametoenteritand
returntotheFilterPackinUsescreen.
6. Repeatpressinganumberedbuttonand
enteringaFilterNameuntilyouhavecreated
thelterpackyouwant.Whennished,touch
the [Close]toreturntotheFilterCompensation
Setting Screen.
7. Anumberedlistoftheltersyouselectedwill
appearonthescreen.Theradiobuttonwill
alsoshowthatthislterselectionwillbeinuse
whenameasurementismade.
8. Touch the [OK]toreturntotheMeasurementScreen
tostartmeteringwiththelterpackyoucreated.
•
See “8. Registered Filters (See P62)” for details about preset
lters registered in the default setting, and “6-6-7.Filter Name
Editing (See P56 )” for details about customized preset lters.
6-5-3. Deselecting Filter
1. TouchtheToolBoxicon atthebottom
oftheMeasuringscreentoopentheToolBox
screen.
2. Touch the [Filter Compensation]todisplay
theFilterCompensationSettingscreen.
3. Touchtheradiobuttonof[No Filter] in the
displayedFilterCompensationSettingscreen
todeselectthelterinuse.
4. Touch the [OK] to return to the Measuring
screenfornormalmeteringwithno
compensation.
ToolBoxScreen
Filterpackinuse
FilterCompensationSettingScreen
Filter
factor
numbers
FilterCompensation
Setting Screen