Sekonic LITEMASTER PRO L-478 Series - 6-2. Mid. Tone Function

42
6-2. Mid. Tone Function
ThisisusedtoplaceameasuredvalueatthecenteroftheAnalogEVScale.
TheMidTonefunctionhasfouroperations:
•
SetscurrentmeasuredvalueasMidTone
•
SetsmemorizedvalueasMidTon
•
ModiesMidTonevalue
•
Recalls Mid Tone Measuring Screen
6-2-1. Setting Measuring Value as Mid. Tone
1. PresstheMeasuringbutton
8
totakereading
anddisplaytheresultingvalue.
2. TouchtheToolBoxicon atthebottomofthe
MeasuringscreentodisplaytheToolBoxscreen.
3. Touch the [Mid. Tone Set]todisplayMid.Tone
Set screen.
4. Touch the [Set from Current Measurement] to
setthecurrentmeasuredvalueastheMid.Tone
andreturnthemetertotheMeasuringscreen.
•
Touching the [CLOSE] button on any screen cancels the operation
and returns the meter to the Measuring screen.
6-2-2. Setting Memorized Value as Mid. Tone
1. TouchtheToolBoxicon atthebottomof
theMeasuringscreentodisplaytheToolBox
screen.
2. Touch the [Mid. Tone Set]todisplayMid.
Tone Set screen.
3. Touch the [Set from Memory]todisplayMid.
ToneSetfromMemoryscreenanddisplayall
memorizedvalues.
willappearnexttoincidentlight
measurements;
willappearnexttoreectedlight
measurements.Theanalogscalewillalsoappear
withmeasurementindicatorsdisplayed.
4. Touchthememorizedvalueyouwanttoset
asaMidTone.Thedisplaywillreturntothe
Measuring screen and the analog scale will show
allmemorizedvalueswithyourselectionasthe
Mid Tone. Touch the [CLOSE] to return to the
Measuring screen without setting the Mid. Tone.
Mid. Tone Set Screen
Mid. Tone Set Screen
Mid. Tone Set
(Memory)Screen