Sekonic LITEMASTER PRO L-478 Series - Frame Rate Editing

54
9. Input/Editthecamera/lmprole
characteristics.
a. Touch+/-buttonsormoveslidertoset
desiredexposurecompensationvalue
within+/-5EV(stop)range.
b. Touch+/-buttonsormovesliderto
desiredvaluesofdynamicrangesand
clippingpointsforprolewithin+/-10EV
(stop) range.
*ClippingpointscannotexceedDynamic
range.
c. Touch [OK] to return to ISO selection
screen. (Touch [Cancel] if editing is not
needed. Touch [Default]ifresettheprole
ofISObeingselected.)
10. Touch [Close] to return to Start screen for
Editprole.CreateorEditprolenameif
desired. (See P51 for details.)
11. Touch [Close]toreturntotheSelectProle
toEdit/Checkscreen.
6-6-5. Frame Rate Editing
InadditiontothestandardframeratesavailableintheL-478Series,upto20frame
ratescanbecustomizedanddisplayedinthemeterscreen.
*Framerateissetin0.001(f/s)stepoverarangeof
0.001to9999.999(f/s).
1. PresstheMenubutton
7
onthemeter.(See
P21 for details.) to open the Menu screen.
2. Touch [6. Edit Frame Rate]todisplaySelect
FrameRatetoEditscreen.
3. Touchthecheckbox✓todisplaythe
customizedframerateinthef/ssettingicon
intheMeasuringscreenforHDCINEmode
andCINEmode.(Acheckmark✓ indicates
framerateisavailableforuse.Todeactivate
theframerate,touchboxagaintoreturnto
❑.)
4) Touch ▲/▼orslidengeronbartoselect
framerateandtouchoneoftheframerate
buttontodisplayInputFrameRatescreen.
5) Touchbuttonsonthekeypadtoinputthe
valueofframerate.(SeeP13fordetailson
inputting.)
ISO Selection Screen
ProleCharacteristicEdit
Screen
Exposure
Comp.Value
Dynamic
range(+)
Clippingpoint(+)
Clippingpoint(-)
Dynamic
range (-)
FramerateEditSelectionScreen
InputFramerateScreen
ChecktodisplayornotintheFrame
Rate setting in the Measuring Screen