Sekonic LITEMASTER PRO L-478 Series - Page 53

53
2) EditingExposureProle
1. PresstheMenubutton
7
on the front of
meter.(SeeP21fordetails.)
2. Touch [5. Check/Edit Profile]toviewprole
listintheSelectProletoEdit/Checkscreen.
3. Touch ▲/▼orslidengeronbartoviewthe
nameoftheExposureProleyoudesireto
use and edit.
4. Touchthecheckbox✓todisplaytheprole
intheSetProlescreen.(Acheckmark
✓indicatesproleisavailableforuse.To
deactivatetheprole,touchboxagainto
return to ❑.)
5. Touchtheprolenamebuttontoeditthe
prole.
6. Toeditprolename,touchthe[EditProle
Name]todisplaythekeypad.Inputthename
(up to 31 characters) and touch [OK] to enter
theprolenameandreturntoproleedit
screen.
SelectProleto
Edit/Check
EditProle
EditProleName
7. TouchoneoftheiconsofMeasuringmode
(Ambient/ashlight)andlightreceiving
method(incident/reectedlight)toenterISO
editing screen.
8. Touch ▲/▼orslidengeronbartoviewISO
valuesandtouchthedesiredISObuttonto
entertheproleeditingscreen.
•
ISO Selection screen does not show ISO850. Exposure prole at
ISO1000 is used for ISO850 setting in Measuring screen.
EditProleScreen
Checktodisplayornotinthe
SetProleScreen
EditProle
Icon