Sekonic LITEMASTER PRO L-478 Series - Shutter Angle Editing

55
6) Touch [OK]toreturntoSelectFrameRateto
Edit screen. (Touch [Cancel] if editing is not
needed.
7) PresstheMenubutton
7
to return to the
Menu screen.
8) Thesecustomizedframeratewillappear
to the tail end of the selection order in the
f/ssettingiconintheMeasuringscreenfor
HDCINEmodeandCINEmode.(From1to
1000f/sarestandardavailableframerates,
andafter1000f/s,customizedframerates
appear.)
6-6-6. Shutter Angle Editing
InadditiontothestandardshutteranglesavailableintheL-478Series,upto20shutter
anglescancustomizedanddisplayedinthemeterscreen.
*Shutterangleissetin0.001°stepoverarange
from0.001to360°.
1. PresstheMenubutton
7
onthemeter.(See
P21 for details.) to open the Menu screen.
2. Touch [7. Edit Shutter Angle]todisplay
Select Shutter Angle to Edit screen.
3. Touchthecheckbox✓todisplaythe
customizedshutterangleintheANGsetting
iconintheMeasuringscreenforCINEmode.
(Acheckmark✓ indicates shutter angle is
availableforuse.Todeactivatetheframe
rate,touchboxagaintoreturnto❑.)
4. Touch ▲/▼orslidengeronbartoselect
shutter angle and touch one of the shutter
anglebuttontodisplayInputShutterAngle
screen.
5. Touchbuttonsonthekeypadtoinputthe
value of shutter angle. (See P13 for details on
inputting.)
6. Touch [OK] to return to Select Shutter Angle
to Edit screen. (Touch [Cancel] if editing is
not needed.
7. PresstheMenubutton
7
to return to the
Menu screen.
8. Thesecustomizedshutteranglewillappear
to the tail end of the selection order in the
ANG setting icon in the Measuring screen
forCINEmode.(From1to358°arestandard
availableshutterangles,andafter358°,
customizedshutteranglesappear.)
Select Shutter Angle to Edit
Screen
Input Shutter Angle Screen
Checktodisplayornotinthe
Shutter angle setting in the
Measuring Screen