Sekonic LITEMASTER PRO L-478 Series - 6 Functions; 6-1. Memory Function

39
6 Functions
6-1. Memory Function
Thismetercanstoreuptoninemeasuredvaluesinmemoryforincidentlight
andreectedlightsimultaneously.Thisfunctioncanbeusedinallmodesexcept
Illuminance/LuminancemeasuringandMultiple(cumulative)Flashmodes.
6-1-1. Memory
1. PresstheMeasuringbutton
8
on the side of
metertotakeameasurementanddisplaya
valueonthemeasuringscreen.
2. PresstheMemorybutton
5
tomemorize
measuredvalue.AndM1willappearatthe
top of the screen to indicate one value has
beenmemorizedandanindicatorwillappear
on the analog scale.
3. Repeatsteps1and2asdesiredtomemorize
upto9valuesforcomparison.
•
Memory Function cannot be used with the following modes.
• IlluminanceMeasuringMode(lux,fc)
• LuminanceMeasuringMode(cd/m
2
, )
• CordFlashAccumulativeMode
• CordlessFlashAccumulativeMode
• RadioFlashAccumulativeMode(forL-478DRSeriesonly)
•
The tenth or more measurement will be displayed but can not be memorized.
Setting
value
Measuring
value (f-stop)
ExampleofTpriority
inAmbientlight
Memorizedmeasuringvalues(f-stop)