Sekonic LITEMASTER PRO L-478 Series - 6-3. Average Function

45
6-3. Average Function
Uptoninememorizedmeasurementscanbeaveragedandtheresultdisplayed.
ThisfunctioncanbeusedinallmodesexceptIlluminance/Luminancemeasuringand
Multiple(cumulative)Flashmodes.
1. PresstheMeasuringbutton
8
onthesideofmetertotakeameasurement.
2. PressMemorybutton
5
tomemorizethemeasuredvalue.
Thememorizedvaluewillalsoappearontheanalogscale.
3. Repeatsteps1.and2.toremeasureandmemorizeuptoninevalues.
4. Touch the Average icon atthebottomofthescreentocalculateanddisplay
theresultontheDigitaldisplayaswellasAnalogScale.
“AVE”willappearonthescreenandAverageicon in reverse to indicate the
MeasuringscreenisdisplayinganAveragedValue.
5. Touch the Average icon again to return the Measuring screen value to the
valuelastmeasured.
Setting
value
Measuring value
(f-stop)
1/10step
measurement
value (f stop)
Measuring Screen
(aftermemory)
Memorizedmeasurements(f-stop)
Measuring Screen
(Average)
Averaged values