Sekonic LITEMASTER PRO L-478 Series - Setting Value Icons; Measuring Unit;Displayed Value Field

18
2) Setting Icons
 SettingiconstypeandvaluewillchangewiththeMeasuringmodeinuse.Touchor
slidengerup/downovertheiconstochangethevalue.
Tprioritymode
CINEmode
Fprioritymode
HDCINEmode
TFprioritymode
 Explanationofvaluetypes
•
T : Shutterspeed
   Shutterspeedisdisplayedinthefollowingway.
   30m(30minutes),8s(8seconds),125(1/125ofasecond)
•
ISO : ISOsensitivity
•
F : f-stop(aperture)
•
ANG : Shutterangle
•
f/s : Framespersecond(Cineframerate)
Operating Set Icon:
 Valueincreaseswhenuparrow(▲) is touched.
 Valuedecreaseswhendownarrow(▼) is touched.
 Slidetheiconnumberupordownwithyourngertiptoincreaseordecreasethe
reading.
3) Measuringunit/Displayedvalueeld
Thisdisplaysinformationsuchasmeasuredvaluesandmeasuringunits.
Measuringvalueunit:T(shutterspeed),F(f-stop),ISO(ISOsensitivity)
Measuring values
Measuring value
Measuringmodeinformation
display
•lx,: Ambientlightilluminance
lxindependentdisplay
•fc: Ambientlightilluminance
fcindependentdisplay
•cd/m
2: 
Ambientlightluminance
cd/m
2
independent
display
•: Ambientlightluminance
independentdisplay
Additionalinfoformeasuringvalue
Example:1,900,000lx
Flashcomponent
•Theratioofashlighttothetotalexposureisdisplayedasa
percentage (in 10% steps)
Measuringvalueunit:F(f-stop)