Sekonic LITEMASTER PRO L-478 Series - Custom Setting Function

51
6-6-3. Custom Setting Function
Thisenablesquickandeasysetupofindividualmeterpreference.
1) CustomSettingFunctionList
Setting No. Custom Setting Name Item
Default
Setting
1 IncrementsofT+F 1step*
1
1/3step 1/2step - 1 step
2 Displayof1/10StepIncrements*
2
On Off - - On
3 Compensation+/-Preference Additive
Direction
Subtractive
Direction
- - Additive
Direction
4 SwitchingMeasuring/Memory
Buttons*
3
Standard Reverse Auto-
Switching*
3
- Standard
5 AmbientMode*
4,7
On Off - - On
a) TPriorityMode*
4
On Off - - On
b) FPriorityMode*
4
On Off - - On
c) T+FPriorityMode*
4
On Off - - On
d) HDCinemode*
4
On Off - - On
e) Cinemode*
4
On Off - - On
6 Flashmeasuring*
5,7
On Off - - On
a) Cordlessmode*
5
On Off - - On
b) Cord-inmode*
5
On Off - - On
c) Radiomode SeeeachL-478DRSeries,L-478DR-ELSeriesorL-478DR-PX
Seriesmanual
d) Multiple(Cumu.)FlashMode*
5,6
On Off - - On
7 AdditionalData None EV Luminance/
lIluminance
- None
8 Illuminance/LuminanceUnit Lux(lx)or
Candle/m
2
(cd/m
2
)
Foot-
candle (fc)
or Foot-
lambert()
- - Lux(lx)or
Candle/m
2
(cd/m
2
)
9 Illuminance/LuminanceIndividual
Display
On Off - - On
10 ColorTheme Black White Rose Blue Black
11 Auto Power Off 5min. 10min. 20min. No auto
power off
5min
12 BacklightBrightness Bright Normal Dark - Bright
13 AutoDimmer 20 sec. 40 sec. 60 sec. Nodimmer 20 sec.
14 ResetCustomSetting*
8
Select [OK] or [Cancel]toresetCustomSetting
*1 1/10 step increments is always displayed in the setting of 1 step regardless of setting of “2. Display of 1/10 Step Incre-
ments”.
*2 1/10 step increments ON/OFF will be effective only when 1/3 step or 1/2 step is selected.
*3 Auto switching: Measuring button
8
and Memory button
5
will be standard conguration in incident light mode,
however the button conguration will be switched (in reverse) automatically in reected light mode.
*4 When Ambient Mode is set to Off, sub settings of a) T priority Mode to e) Cine Mode cannot be selected.
*5 When Flash Mode is set to Off, sub settings of a) Cordless Mode to d) Multiple (Cumu.) Flash Mode cannot be selected.
*6 When Multiple (Cumu.) Flash Mode is set to On, the following mode is active in the Measuring Mode Selection screen:
Cordless Multiple (Cumu.) Flash mode and Cord Multiple (Cumu.) Flash mode.
*7 When both Ambient Mode and Flash Mode are set to Off (all measuring modes are off), only T Priority Mode in Ambient
Light is active.
*8 This operation returns all items set in Custom Setting to the default settings. Touch [OK] to return default setting or touch
[Cancel] to cancel the reset of custom setting.
*9 See each L-478DR Series, L-478DR-EL Series or L-478DR-PX Series manual for custom settings of radio operations.