Selectronic Select.live - Connecting to SP PRO Inverter

Installation and Commissioning Selectronic Australia
OI0009 Revision 01 Select.live User Manual 13
Connection to the SP PRO
4.2.1 Connection to the SP PRO Series II
• Connect Select.live to the SP PRO Series II using the Communication Cable supplied,
as shown.
• Select.live is powered from the SP PRO. The power adaptor is not required.
• Place Select.live on the wall mount plate, securing it with the small screw.
• Turn on the SP PRO and Select.live will power up, ready to login.