Selectronic Australia Installation and Commissioning
18 OI0009 Revision 01 Select.live User Manual
4.4.3 Configuring Select.live to the Internet via Ethernet
• Select the <Connection Type> as “Ethernet” and click [Next] to continue.
• A form for the Ethernet connection appears as shown.
• With <DHCP Enabled> as “On”, enter the <Hostname> (can be any name or
empty) only. It is recommended to have <DHCP Enabled> as “On”.
• With <DHCP Enabled> as “Off”, enter the <Hostname> (can be any name or
empty), <Static IP Address>, <Static IP Netmask>, <Static IP Gateway> and
<Static IP DNS server>.
• For more information on the input field, Click [More Information].
• Click [Finish] to proceed to final setup of the Setup Wizard.
To Next Page
Loading...