Selectronic Select.live - Changing System Settings

Select.live Portal Operation Selectronic Australia
OI0009 Revision 01 Select.live User Manual 55
Changing System Settings
System Settings are only available to the owner. Installer cannot access System Settings.
• Login into the portal (see page 42)
• Click on [System Name] from MY SYSTEMS table.
• Click on ‘Settings’ from Left Menu
Position
Parameter
Description
A
<System
Name>
Name of system. If empty, SP PRO serial will be system
name.
B
<Solar Size>
Input for the solar size of the system in kW
C
[Save]
Saves <System Name> and <Solar Size>
C
[Reset]
Revert the <System Name> <Solar Size> before click of
[Save]
D
<Allow Installer
Access>
Check this box to grant access of your system to your
installer. Provide your installer with the Device ID and
Serial to enable them to add your system to their profile.
E
System
Location
Google map with a marker showing the location of the
system. Can be dragged to update location.
E
[Save]
Save the updated location of the system.
E
[Reset]
Reset to original location before [Save]
F
[Delete System]
Delete the system and its data with confirmation (see
page 56)
A
B
C
F
E
D