Select.live Operation Selectronic Australia
OI0009 Revision 01 Select.live User Manual 35
Adding new SP PRO
Following is the procedure to add new SP PRO detail:
• Login into the device (see page 15)
• Click on ‘Advanced Settings’ in the upper right corner.
• Click on [New SP PRO] in the SP PRO table.
Scan for the SP PRO with <SP PRO login password>. On
success, update <SP PRO Serial>
The Serial number of connected SP PRO. (pick only) Update on
click of [Autodetect]
SP PRO login password. Defaults to “Selectronic SP PRO”
Submits form. On successful – add new SP PRO and closes. On
fail – pops an error message.
On click – closes the dialog box
• Change <SP PRO login password> if it is different than “Selectronic SP PRO”
• Click [Autodetect]→[Create].
• A new SP PRO is successfully added.
To Next Page
Loading...
