Selectronic Australia Installation and Commissioning
14 OI0009 Revision 01 Select.live User Manual
4.2.2 Connection to the SP PRO Series I
• Connect Select.live to the SP PRO Series I using the Communication Cable and the
Powered Console cable supplied, as shown.
• The Powered Console Cable threads though the gland and sleeve provided through
the base of the SP PRO. It is connected to Serial Port 1 inside the SP PRO.
• Connect the power adapter to Select.live.
• Use the Gland and Sleeve to fasten the Powered
Console cable to the gland plate located at the
bottom of the SP PRO as shown.
• Place Select.live on the wall mount plate and use
secure I with the small screw.
• Turn on the SP PRO and the power adapter. Select.live is ready to login.
To Next Page
Loading...
