Installation and Commissioning Selectronic Australia
OI0009 Revision 01 Select.live User Manual 15
Login to Select.live
• Check that the power LED and LCD display are lit after the connecting power to the
SP PRO (and power adaptor for SP PRO series I). After a minute, the following
message will be displayed on the LCD display of Select.live:
• Connect to Select.live using Wi-Fi SSID: “selectronic” with no password.
• Open a web browser and enter http://192.168.1.1. The browser will then direct you
to Select.live web interface.
• Select.live is ready for Setup Wizard.
Setup Wizard of Select.live
To enter into the Setup Wizard, click on the large green button [Setup Wizard] from the
home page of Select.live web interface as shown:
To Next Page
Loading...
