Selectronic Australia Installation and Commissioning
16 OI0009 Revision 01 Select.live User Manual
4.4.1 Configuring Select.live for the SP PRO
• Select.live autodetects the SP PRO. The SP PRO details are shown in the dialog box
as shown. Click [Next] to proceed to the next step of the Setup Wizard- Selection of
the network.
• If the device couldn’t autodetect the SP PRO, a form will appear in the dialog box as
shown:
• Enter the correct <SP PRO Login Password> and click [Autodetect].
<SP PRO Login Password> defaults to “Selectronic SP PRO”. For more detail on
<SP PRO Login Password>, refer to the SP PRO user manual.
• On successful autodetect and correct <SP PRO Login Password>, the SP PRO serial
number will appear in the <Serial>. Click [Next] to continue.
To Next Page
Loading...
