Selectronic Select.live - Completing the Setup Wizard

Selectronic Australia Installation and Commissioning
20 OI0009 Revision 01 Select.live User Manual
4.4.5 Completing the Setup Wizard
• Select.live is ready to link in the Portal with “Device ID” and “Serial”.
• Within 30 seconds, “Device ID” and “Serial” are also shown in LCD display of
Select.live as shown:
Note: The Wi-Fi (hotspot) “selectronic" is now disabled. To get it back, factory
reset the device (See page 41) then rerun the Setup Wizard.
--- REGISTRATION ----
Cloud:OK
IP :XXX.XXX.XXX.XXX
D.Ver:XX.XX.XX
Please Enter:
Device ID: XXXXXXXX
Serial: XXXXXX
in Select.live portal