Selectronic Select.live - Select.live Display Operation

Select.live Display Operation Selectronic Australia
OI0009 Revision 01 Select.live User Manual 25
5 Select.live Display Operation
Select.live has an LCD display that helps in the setup of the device and displays SP PRO
data. Depending on the device setup, the LCD display changes the screen.
Following are the screens that are displayed on the LCD display of the device.
Before Setup Wizard
The following screen is displayed only after a minute following first power-up or factory
reset. After the Setup Wizard has been completed, the screen changes.
Parameter
Description
“selectronic"
The Wi-Fi hotspot SSID that is used for connection by PC or
mobile device
http://192.168.1.1
The URL to login to the web interface of the device.
The backlight of the LCD display will turn OFF a minute after power-up.
After the Setup Wizard
The following screens are displayed only after the Setup Wizard and before adding the
device to the portal.
Screen 1: Registration Screen 2: SP PRO Status
------ SETUP -------
Connect to Wi-Fi
SSID: selectronic
Browse to:
http://192.168.1.1
to setup
--- REGISTRATION ----
Cloud:OK
IP :192.168.43.130
D.Ver:3.6.3
Please Enter:
Device ID: AC375816
Serial: 161818
in Select.live portal
--- SP PRO Status ---
SN :161818
Rating:3000.0W
SoC :84.9%
Grid :0W
Load :0W
Batt :0W
Solar :0W