Selectronic Select.live - Viewing SP PRO Detail; Deleting the Connected SP PRO

Selectronic Australia Select.live Operation
34 OI0009 Revision 01 Select.live User Manual
Viewing SP PRO detail
To view the connected SP PRO detail:
• Login into the device (see page 15)
• Click on ‘Advanced Settings’ in the upper right corner.
• Click on [Detail] in the SP PRO table.
Parameter
Description
Serial Number
Serial number of the connected SP PRO
Rating
The power rating of the connected SP PRO in kW unit. E.g.
3.0kW
Device ID
A unique 8 characters which used to link the device to the
portal.
Password
SP PRO login password
[Close]
On click – closes the dialog box
Deleting the connected SP PRO
• Login to the device (see page 15)
• Click on ‘Advanced Settings’ in the upper right corner.
• Click on [Delete] in the SP PRO table.
Note: This action is not reversible