Installation and Commissioning Selectronic Australia
OI0009 Revision 01 Select.live User Manual 17
4.4.2 Configuring Select.live for the Internet via Wi-Fi
• Select the <Connection Type> as “Wi-Fi” and click [Next] to continue as shown.
• A form for the Wi-Fi connection appears as shown.
• Click [Refresh] to update the list of Wi-Fi networks available in the <Available Access
Points>. This takes about 5 seconds.
• Select your Wi-Fi network from the <Available Access Points> to update the
<SSID> and <Encryption>.
• Enter <Password> of the Wi-Fi network.
• Click [Finish] to proceed to final setup of the Setup Wizard.
To Next Page
Loading...